FAQ

FAQ Frames

WHAT TORQUE SHOULD I TIGHTEN MY BIKES LINKAGE BOLTS TO?

  • MAIN PIVOT BOLT: 30-35NM
  • ROCKER PIVOT BOLT: 30-35NM
  • M8 SHOCK BOLTS: 35NM
  • BRAKESIDE PIVOT BOLT: 16NM
  • DRIVESIDE PIVOT BOLT: 20NM
  • SEATSTAY ROCKER PIVOT BOLTS: 20NM

WHAT FRONT DERAILLEUR SHOULD I USE?

A HIGH DIRECT MOUNT FRONT DERAILLEUR.

WHAT BOTTOM BRACKET DO I USE?

PYGA FRAMES USE THE PRESS-FIT BB 92 BOTTOM BRACKET SYSTEM.

WHAT IS YOUR REAR BRAKE STANDARD?

160MM DIRECT REAR POST MOUNT. DEPENDING ON FRAME MODEL , ONE OR MORE WASHERS MAY NEED TO BE ADDED TO LIFT CALIPER TO DESIRED POSITION. THESE WASHERS ARE PROVIDED WITH YOUR FRAME.

WHAT REAR WHEEL STANDARD DOES YOUR BIKE SUPPORT?

FRAMES ARE SUPPLIED WITH THE SYNTACE X12 AXLE SYSTEM. YOU WILL NEED A 12X142MM COMPATIBLE REAR HUB.
THE ONETEN29 AND ONETWENTY650B FRAMES DO NOT SUPPORT ANY OTHER STANDARD. SEE WWW.SYNTACE.COM FOR DETAILS AND COMPATIBLE HUBS

WHAT HEADSET DO I USE?

ONETEN29 // ONETWENTY650

USE A TAPERED STEERER HEAD TUBE, WHICH IS 1.5” AT THE BOTTOM AND 1 1/8TH AT THE TOP. IF YOU WANT TO REPLACE THE BEARINGS, THE TOP USES 44MM SEMI-INTEGRATED AND THE BOTTOM USES A 52MM BEARING DIRECTLY FITTED INTO FRAME WITH NO CUP (YES, IT’S ABSOLUTELY FINE). IT’S THE SAME BEARING THAT COMES IN THE LOWER 56MM SEMI-INTEGRATED SET.

STAGE // STAGE MAX // ONEFORTY650 PASCOE

USE A TAPERED STEERER HEAD TUBE, WHICH IS 1.5” AT THE BOTTOM AND 1 1/8TH AT THE TOP. IF YOU WANT TO REPLACE THE BEARINGS, THE TOP USES 44MM SEMI-INTEGRATED AND THE BOTTOM USES A 56MM SEMI INTERGRATED SET.

WHAT SEATPOST WIDTH SHOULD I USE?

YOU WILL NEED A 30.9MM SEATPOST


FAQ Wheels

Coming soon